Cementitious Coating

Product Details:

“BULWARK DUAL RUBBER COATING”

*Acrylic based Dual rubber coating with 55% solid Content.

USES :

*Primer /waterproofing for Terrace, Sunken, Water tank, Swimming pool etc.,

*Wherever need Premium primer cum cementitious waterproofing

Product Details:

“Flexible PREMIUM ACRYLIC CONCRETE PROTECTIVE MEMBRANE”

*Mix 1kg of Part A (Liquid) into 2kg of Part B (powder) and gradually mix with slow  speed strier and apply it within 30minutes.

*Flexible, Elastic and can bridge cracks.

*Flexible Acrylic Polymer Cementitious water proofing Coating.

USES :

*Terrace, Water tanks, Bathrooms.

*Under floor topping coating.

Product Details:

“Flexible PREMIUM ACRYLIC CONCRETE PROTECTIVE MEMBRANE”

*Mix 1kg of Part A (Liquid) with 3kg of Part B(Powder) use slow speed stirrer and apply it within 30minutes, in order to achieve consistency can add 5-10% of potable water on total weight.

USES :

 *Terrace, Water tanks, Bathrooms.

*Under floor topping coating.

Product Details:

A Surface Treatment System for Protecting Concrete , This can be used to increase the strength of RCC and PCC and increase the water proofing ability in any plastering and flooring mortar this also can be used as economic primer for any cementacious water proofing system .

Additional Information:

• Production Capacity: 200 TON PER MONTH
• Delivery Time: IMMEDIATE
• Packaging Details: WELL PROFFOSSIONAL PACKING READY FOR EXPORT

Product Details:

Premium acrylic liquid membrane”

bulwark elasto coat is single component, premium hybrid acrylic membrane which is consists of specially developed polymers and properly selected components. bulwark elasto coat is not a usual elastomeric coating unlike other elastomeric coating bulwark elasto coat made by using pure acrylic resin and modified kaolin which ensure long lasting performance. It cures by natural air, sunlight and gives elastomeric waterproof membrane bulwark elasto coat is elastomeric in nature and has good resistance to weather and sunlight.

bulwark elasto coat has excellent protection against uv rays and reduces the temperature of 8°c –13°c it posses breathing properties, water resistance, crack bridging properties & uv resistance.

area of application:

• wherever water proofing need with high elongation
• open terrace and
• any open surfaces
• on metal roof
• exterior side walls

features:

• will provide flexible water proof membrane.
• allows trapped vapor to escape thus preventing peeling and blistering.
• can be applied in uniform thickness to horizontal and vertical surfaces.
• develops excellent bond to most building materials.
• bulwark elasto coat is not affected by ultraviolet light or by chemicals ranging from mild acids to strong alkalis.
• bulwark elasto coat is non-flammable and does not give off toxic gases.
• bulwark elasto coat is not harmful to the health of workman.

method of application in water proofing : surface preparation:

• prior to application of bulwark elasto coat the surface must be prepared as mentioned below to avoid failure and to achieve maximum beneficial properties.
• when placing bulwark elasto coat coating, water should be removed so that surface is only damp. In no case there should be standing water.
• the surface shall be cleaned to remove all dust, foreign matters, loose materials or any deposits of contamination which could affect the bonding.

• after surface preparation like removing loose particles and crack treatment bulwark elasto coat must be applied on the top of bulwark prime sealer cote or 1:1 diluted self primer
• two coats are recommended one more coat can be done to achieve desired thickness.
• first coat should be allowed to air dry for 2-3 hours prior to apply subsequent coat.
• if pond test to be done then can be done only after 48 hrs from the time of application.

precautions:

• bulwark elasto coat system must be applied with temperature above 2 c and below 40 c
• bulwark elasto coat should not be used with addition of cement.
• bulwark elasto coat is not harm for applicators and users.

storage:

• store in dry cool place in the temperature range from 5 c to 30 c in sealed condition.
• do not allow to freeze. Keep away from direct sunlight.

available colour:

• white, terra cotta and grey

packaging:

• 10 kg, 20 kg, 25kg

Product Details:

Bulwark Premium Grade SBR is very economic multipurpose polymer liquid which is widely using for various building repair and waterprooofing works in various contractor like Builder , water proofing contractor 

Additional Information:

• Production Capacity: 200 TON PER MONTH
• Delivery Time: IMMEDIATE

Product Details:

“QUICK SETTING CEMENT”

BULWARK PLUG is a fast sealing cement based product formulated with selected additives

*It sets very fast within a few minutes.It is used in a situation where very quick setting is required.

USES :

*It stops running water, reducing damage.

* It is cementitious product and hence

 *it is economical.

Product Details:

“CEMENTITIOUS PRECISION GROUT”

BMC - 1 is ready to use cement aggregate/sand mix requiring only addition of waterto produce a free flowing repair concrete.

APPLICATION AREA :

*Is designed for free flowing inbetween highly congested a reinforcement located in difficult to reach areas